A card holder with 4 storage containers. Holds standard 3.5 in x 2 in business cards. Holds a maximum of 293 16 point (0.016 in) Business Cards and 335 14 point (0.014 in) Business Cards. If you don't have that amount, or want to have a 5th container behind the cards, you can use the included divider to set the backing wherever you want. There are 12 possible spots to place the divider in the design, each 0.39 inches apart from each other. Print however you want with any material, however lay the divider flat when slicing. it is at a 15 degree angle, so rotating about 75 degrees fixes the issue. If using cura, you can use lay flat in the rotation menu and then increase the z position to lay flat. The model I made was scaled down for faster printing, so the actual model will not have a bend. You can download the .step model to customize the container or the divider, such as adding a logo. Please post a make and give a like if you think this is a good model it helps me a lot. Happy Printing!