I tried this print twice and both times the support for the left arm failed causing the left arm to shred. 

billrlogan

0.2mm layer, 2 walls, 15% infill

Hi, I am so sorry but it is not issue of print profile. My Hulk was printed with same profile and it is OK.

Otomar

 i’m not sure what it might be. I’m confused as to why the support for that arm falls away from the print. I’m using Bambu PLA. i’ve been printing stuff all day long and I haven’t had an issue with anything else like this. Any suggestions would be greatly appreciated because I love this little hulk figure and my four-year-old granddaughter would even love it more.

user_2786168929

these came out just fine used the  Bambu cool plate for PLA and no issues. 
awesome prints thank you. 

Jarhead4dausa

Nice Print with pla+ and adaptive layer height. Parts fit perfectly. 

74s5qk7fw8

Sliced into 2 parts, colored

my kiddo just wanted a black hulk - well he was awesome for a couple days so I scoped out this design and it printed perfect. thank you! 

Red---Tape

Great!! scale it to 25% with 0.16 height 

Santi

nach dem zweiten versuch hat es geklappt.
erster versuch hat er den linken arm nicht geruckt erst beim zweiten versuch. daher den 4 Stern statt 5 Stern.
Filament mit "Glow in the Dark"

Plotterzebra

rosenbebov

Mi dispiace ma per farti coraggio ti invio foto del mio lavoro ultimato

galeone.gianfranco1

Support broke off in the middle of the print using this profile. Smooth PEI Plate X1 Carbon. PLA - Bambu Dark Matte Green (11501).

THEuda

user_2902708594

even with supports both tree and normal the fingers would not print. kept falling off at second knuckle. same on both hands. still a good print. 

Printed the model that was split in half, worked perfectly!

gapplespice

cover

hulk_374e0af2-fdd2-4155-b626-527eff6af8e9.jpg

FB_IMG_1628080038141_11e8ccff-d158-45c2-bf46-45d0ecfe54e8.jpg

FB_IMG_1628080061391_561fc8b1-495b-4f92-a490-4192509f59f1.jpg

wa10_9d0d1fd4-a6ec-4041-8649-2241b380024c.webp

wa11_567e0ca0-22c1-4d0c-b955-a31702f23ecf.webp

wa12_d35b215e-88af-4cb3-ab4e-0418ece0e941.webp

plate_1.png

After having 3-4 failed prints due to broken support for left arm i decided to slice the model into 2 parts, this way it solved my problem with broken supports and reduced printing time for colored model from 21 hours to around 6 hours. Model is with circular connection between parts which means it can be twisted around (shown in the third photo). Things i need to fix: 1. There's still some slightly uncolored part on the top of the pants. 2. I will probably add square connection in order for the model to be static and not to twist around. 3. Depending on the PLA - quality of the part can be downgraded in the area of supports for the hands. Filament i have used for printing: 1. Bambu Matte Dark Green 2. Eryone Matte Black 3. Eryone Clove Purple (Matte) With using this profile you have to adjust the following: 1. Printer type (i am using X1C) 2. Bed type (i am using Smooth PEI Plate) 3. Aux fan cooling (i have set it to 0% because it causes my prints to fall from the build plate, smooth PEI requires higher temp than cool plate)

hulk2_4032d227-6a6d-485b-8c3a-534484377b4a.webp

hulk_de5be7a5-11c5-4683-8b37-2d27b9987fd1.webp

IMG_1969_040e0ba7-4ec0-4097-af1f-fdb8f852e355.webp

IMG_1970_d0ecaf26-652b-4b92-a232-7006331cd1da.webp

printsbyjohnny

As the original print profile failed whenever it started printing left hand tweaked the support settings. Please try this if you're facing same issues in original model.

Print Profile(3)

Description

Comment & Rating (44)

License

Related Models

Hulk

Hulk

Hulk

Hulk Marvel HueForge

HULK

HULK

Print Profile(3)

Description

Comment & Rating (44)

License

Related Models

Hulk

Hulk

Hulk

Hulk Marvel HueForge