Skullcat keycap - Halloween by Hiko 3D

Hiko 3D

Miniatures>Other Miniatures

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.08mm layer, 25% infill, two colors

Designer

5.8 h

1 plate

4.4(7)

Faster AMS Lite/ Possibly AMS

5.4 h

1 plate

5.0(2)

0.08mm layer, 2 walls, 50% infill

5.1 h

1 plate

5.0(1)

Boost

112

168

262

Released

Description

The first keycap to Makerworld! 💥

Skullcat is part of the keycap set created for Halloween 🙀☠🎃

You can create it to decorate your keyboard, you can mix filaments of different colors!! ⌨🎨

I recommend not using such high speeds and only need supports on the internal part.

This design and many more can be found on my patreon 👈

---

ESP:

¡La primera tecla de Makerworld! 💥

Skullcat es parte del conjunto de teclas creado para Halloween 🙀☠🎃

Puedes crearlo para decorar tu teclado, puedes mezclar filamentos de diferentes colores!! ⌨🎨

Recomiendo no usar velocidades tan altas y solo necesita soportes en la parte interna.

Este diseño y muchos más los puedes encontrar en mi patreon 👈

Comment & Rating (14)

@nobroccolihere

It's super cute! I'll definitely print more variants when I get more colors

The designer has replied

@Hiko3D

absolutely fresh!! That keyboard is crazy! I like it!

@Oreosteamwagon

Print Profile

Faster AMS Lite/ Possibly AMS

there is a lot of purged material in the multi colour version. I ended up printing in one colour and painting.

@kvan_26

Thank you so much for sharing! I just printed and I love it. Just wondering what’s this rectangular thing?

The designer has replied

@Hiko3D

If you print it in a single color you must deactivate the purge option, which is what generates that rectangle, great print!!

@strawberrycow3d

Print Profile

0.08mm layer, 2 walls, 50% infill

I was a little cramped for time, so I printed in single color and painted, but it came out perfect! I used glow in the dark paint so it looks great even after my setup is turned off for the night (it didn't fit my keyboard, but it was a cheap knockoff)

(Edited)

@kstlupus

Print Profile

0.08mm layer, 25% infill, two colors

Very good result. Printed at 0,08 layer height with PLA matte. Nice level of detail and overall a good stability on the keyboard, with a firm grip on the switch stem (in my case, Kailh baby kangaroo v2).

@mihnt

Print Profile

0.08mm layer, 25% infill, two colors

Beautiful cap, but the support is nuts if you just print this. Printed it twice and couldn't get the support inside cleared out without breaking the pins no matter what I did.

@Ramon1

Print Profile

0.08mm layer, 25% infill, two colors

took ages to print with a lotvof waste. my advice, dont print just 1. I wasn't aware you needed to remove the bottom part, after I figured it out I broke the inside pin so be careful. I haven't tried it on a keyboard for me it was just a multi color test