gorillatamer uploaded these Fallout Perk Pins a few years back. I downloaded them to make some for my nephew and discovered that many had errors and wouldn't slice correctly.

I ran them all through Netfabb and corrected the issues. I also scaled a few in the Z direction so that they're all 3mm in height since I wanted to do a filament swap at the raised section so they'd have some color to them.

Credit goes to gorillatamer for the work, this is just a cleanup and packaging them all together in one download.

Print instructions

Category: Video Games Print Settings

Printer Brand: Prusa

Printer: i3 MK2.5

Rafts: No

Supports: No

Resolution: .2mm

Infill: 20%

Filament: Repkord PLA Blue / Yellow
Notes:

You may need to enable thin walls in your slicer depending on your settings. The raised outline is pretty thin on most parts causing some slicers to omit the lines.

Sliced at .2mm layer height, you should be able to do a color change a 2.2mm to have the outlines colored.