ANTISTRESS RING
Copyright Claim
ANTISTRESS RING
Boost
190
290
185
Print Profile(4)
16mm ring, 0.16mm layer, 2 walls, 15% infill
15 min
1 plate
20mm ring, 0.16mm layer, 2 walls, 15% infill
18 min
1 plate
version 20mm, 0.2mm layer, 2 walls, 15% infill
16 min
1 plate
version 16mm, 0.2mm layer, 2 walls, 15% infill
13 min
1 plate
Boost
190
290
185
4
906
1.6 k
Released
Description
Due to the great success of these anti-stress rings, I am adding more. No supports are required. If you need to change the size, set larger percentages.
Use a drop of oil for better rotation :)
Nozzle-0,25mm
Layer height-0,10mm
V2: https://makerworld.com/en/models/36691
V3: https://makerworld.com/en/models/36696
V4: https://makerworld.com/en/models/38356
Comment & Rating (185)
All
Print Profile
version 20mm, 0.2mm layer, 2 walls, 15% infill
good design!
1
Reply
Print Profile
20mm ring, 0.16mm layer, 2 walls, 15% infill
Great design. The left ring is printed in TPU, and the right one in PLA-CF. Both work perfectly. Thank you very much.
0
Reply
did you have to adjust any settings i
used a wood pla and pet cf but I can’t get them to spin
0
Reply
Print Profile
★ 𝐅𝐚𝐬𝐭 ‣ QUALITY ‣PLA
works best with brim. tried it in tri-color filament.
(Edited)
The designer has replied
0
Reply
Thanks a lot
0
Reply
Print Profile
20mm ring, 0.16mm layer, 2 walls, 15% infill
Printed without issues on enclosed P1P. Works very well - nice toy :)
1
Reply
Print Profile
16mm ring, 0.16mm layer, 2 walls, 15% infill
Ganz einfach zu drucken und direkt beweglich. kleines Spielzeug, schnell gemacht
1
Reply
Print Profile
20mm ring, 0.16mm layer, 2 walls, 15% infill
I like it 👍🏼
1
Reply
Print Profile
version 20mm, 0.2mm layer, 2 walls, 15% infill
Printed with A1mini
0
Reply
Print Profile
16mm ring, 0.16mm layer, 2 walls, 15% infill
printed nice. thanks.
0
Reply
Print Profile
20mm ring, 0.16mm layer, 2 walls, 15% infill
it's a good thing
0
Reply
Print Profile
20mm ring, 0.16mm layer, 2 walls, 15% infill
Honestly they are too thick to really wear but they are easy to print and spin just fine so I can't complain
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (2)
Related Models
© 2024 MakerWorld