Flexi Toad by PLAGROUND

PLAGROUND

Art>Sculptures

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

38 min

1 plate

3.4(54)

0.16mm layer, 2 walls, 15% infill

53 min

1 plate

3.7(3)

Boost

201

268

543

481

Released

Description

Print in place flexi Toad for fun!

Comment & Rating (59)

@user_1723420919

Print Profile

0.2mm layer, 2 walls, 15% infill

tried twice the hips broke so I glued them. other than that it's a very nice print.

@Groucho

Print Profile

0.2mm layer, 2 walls, 15% infill

Turned out great. Even did this with a 0.6 mm nozzle and still looks pretty nice.

@apjudd

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed OK - Its a really detailed model and needs to be printed at a fine level or better. Top of the toad's head had some difficulty printing. Other than that, prints fine.

@KBPrintster

Print Profile

0.2mm layer, 2 walls, 15% infill

This print profile has a brim, since this model has very delicate parts removing the brim and supports that end up in the joints makes it easy to break the delicate legs. The file should print fine without using a brim with the proper settings.

@byronwlynn

The legs fell off it doesn't work would not recommend.

@MickeyPrints.

Print Profile

0.2mm layer, 2 walls, 15% infill

pretty cool, back legs broke off pretty easily

@Gavin8tor17

Print Profile

0.2mm layer, 2 walls, 15% infill

back legs came off

@truenikobene

Print Profile

0.2mm layer, 2 walls, 15% infill

A nice print, though there can certainly be upgrades to the strength and integrity of the overall print. it broke while removing from bed, but a cool design anyway

@Romeo260

Print Profile

0.2mm layer, 2 walls, 15% infill

👍👍

@PeterS.

Print Profile

0.2mm layer, 2 walls, 15% infill

tried multiple Times, doesnt Stick. also Printing directly through makerworld it always uses brims… Creator tries to make me Look stupid with his comment -1⭐️

(Edited)

The designer has replied

@Tridense

No the profiles do not always use brims, this profile has them removed because post processing in PLA on small details is not easy and also you should dry your filament and clean your buildplate if you have adhesion issues.