Tight fit top plate (Bose Logo) for headphone holder / headphone stand
Remixed by
Tight fit top plate (Bose Logo) for headphone holder / headphone stand
Remixed by
Boost
15
19
7
Print Profile(2)
![[With Bose-Logo] 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US58e4c0a0225d47/design/2023-10-02_182bf2ea9302a.jpg?image_process=resize,w_100/format,webp)
[With Bose-Logo] 0.2mm layer, 2 walls, 15% infill
Designer
1.2 h
1 plate
![[Without Bose-Logo] 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US58e4c0a0225d47/design/2023-12-12_6e88be765ac57.jpg?image_process=resize,w_100/format,webp)
[Without Bose-Logo] 0.2mm layer, 2 walls, 15% infill
Designer
55 min
1 plate
Boost
15
19
7
0
69
12
Released
Description
Summary
After I prinetd the original top plate, I noticed that it had a quiet loose fit.
I redesigned the top plate so that it fits tight. This makes it easier to glue in, if you want to fill the bottom with sand.
- Warning: It can be difficult to get it out, after it was inserted in the bottom part.
[UPDATE: 12.12.2023]
- Version without Bose-Logo was added as 3mf & STL file.
Comment & Rating (7)
All
you did the same mistake as i did. the base is mounted wrong. it is supposed to turned upside-down. After that, the arm will fit perfectly and the plate is not visible.
but nice plate of yours. Printed it without Problems.
1
Reply
I wouldn't consider this a remix, but i added a hole to the plate to put your finger in, so you could put cords or whatever in the bottom part.
0
Reply
I wouldn't consider this a remix, but i added a hole to the plate to put your finger in, so you could put cords or whatever in the bottom part.
0
Reply
I wouldn't consider this a remix, but i added a hole to the plate to put your finger in, so you could put cords or whatever in the bottom part.
0
Reply
You have the base upside down.
0
Reply
Print Profile
[With Bose-Logo] 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
[With Bose-Logo] 0.2mm layer, 2 walls, 15% infill
0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld