Panel templates for the Mystic Lamp by Kardes.Design

Kardes.Design

Household>Decor

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

49 min

1 plate

5.0(7)

Boost

315

129

Released

Description

Raw files of templates for the Mystic lamp.

https://makerworld.com/en/models/31478#profileId-28050

I am looking forward to seeing all the remixes!

lamp

panel

remix

Comment & Rating (23)

@the3der

I'd like to use your template standard but create my own lithophanes to go in the frame. Do you have any recommendation on the size and depth for the lithos? Thanks much.

(Edited)

@the3der

Is it just 115mm x 145mm x 4.5mm thick?

@jadamsclassic

I measured the inside of the frame using 3D Builder's measure tool. The inside of the frame said it was 105mm W x 135mm H. So, I'm currently printing with that measurement. I'll let you know if it worked. (I'm printing the frame without the diffuser as well)

@Duke_Silver

Replying to @jadamsclassic :

Did it work? I would love to do lithios with your laterns

@Skypper

Print Profile

Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

I have used the panels with multiple color frames and multiple layer thicknesses to change the lighting on the Arctic Glow Christmas Lanterns.

The designer has replied

@ValdiLab

Thanks for reviewing, I appreciate the feedback!

@KBPrintster

Print Profile

Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

worked great

The designer has replied

@ValdiLab

Thanks for reviewing, I appreciate the feedback!

@deigge

Print Profile

Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

I sadly didn't have enough filament for 4 panels with motives for my lamp so I decided to print this blank version in black to block the light on the back of the lamp altogether. Works well enough :)

The designer has replied

@ValdiLab

Thank you!