OralB Charger Holder EU/Schuko Remixed by jr2142

Remixed by

jr2142

Household>Other House Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm with supports

Designer

1.2 h

1 plate

4.9(57)

0.2mm Layer @ 2 Walls, 10% Infill + Support

1.2 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

110

187

385

318

Released

Description

Remix from Printables to fit newer chargers. Holder is 2mm longer. All you need in addition are 2 M3x20 screws with nuts. Buy them from Amazon via this link, if you want to thank me for my effort.

Assembly

Squeeze the cable trough the plug holder

Use two M3x20 screws with nuts to mount it to the charger holder. Getting the nut into the top hole can be tricky. A M2x20 also works

Tug in the cable and use the noses to fix the cable in the holder

oral b

schuko

chargermount

Comment & Rating (77)

@sebastian83.lau

I print 2 in one go. The space for the charger needs to be drilled out a bit. I think there is a difference between Europe and other countries. but I really like the model. No more cable clutter around the charger

The designer has replied

@jr2142

I updated the profile to stretch it by another millimeter. It should fit now without drilling.

(Edited)

@sebastian83.lau

Replying to @jr2142 :

That sounds good. I drilled 1 to 1.5mm in a semicircle. I guess. it wasn't much.

@sava

Print Profile

0.2mm Layer @ 2 Walls, 10% Infill + Support

I didn't realize we have different style sockets in Poland. I've had to drill a hole for PE bolt, then super glue the base instead of screwing it. Anyways, with a little elbow grease I've managed to make it work, lol.

@thibault.proto2

Print Profile

0.2mm with supports

Very good product. Does the job well. I had to make some modifications for the adapter to the Schneider Odace sockets and remove the small gaps.

@user_3430739846

Do you have the STL file for this? I need the same modifications

@Locos08

Print Profile

0.2mm with supports

Perfect. Thanks 👍🏻

@Cynric10

Print Profile

0.2mm with supports

worked out great. Thank you!

@al0yyy

Print Profile

0.2mm with supports

printed out great!

@Inofaith

Print Profile

0.2mm with supports

Printed well, was a bit droopy at the overhangs. Could be my PETG though. One suggestion is that you make a bottom cover for the excess cable.

@schichtwerk3d

Boosted

Print Profile

0.2mm with supports

Sehr gut durchdachtes System, einfach im Zusammenbau und hält sehr gut in der Steckdose. Noch besser wäre es wenn es auch für die Unterseite eine Abdeckung gäbe. Ansonsten sehr empfehlenswert!

(Edited)