Kirby vs King Dedede

Project: 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #0056b8 PLA BambuLab Basic Cobalt Blue  Transmission Distance: 0.8
    #a6a9aa PLA BambuLab Basic Silver  Transmission Distance: 0.5
    #6f5034 PLA #BambuLab Basic Cocoa Brown  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
    #f5547c PLA #BambuLab Basic Hot Pink  Transmission Distance: 3.7
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.5
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #8 (0.72mm) swap to BambuLab Basic Cobalt Blue
    At layer #10 (0.88mm) swap to BambuLab Basic Silver
    At layer #11 (0.96mm) swap to #BambuLab Basic Cocoa Brown
    At layer #13 (1.12mm) swap to BambuLab Basic Red
    At layer #15 (1.28mm) swap to BambuLab Matte Ivory White
    At layer #16 (1.36mm) swap to #BambuLab Basic Hot Pink
    At layer #19 (1.6mm) swap to BambuLab Basic Sunflower Yellow
    At layer #23 (1.92mm) swap to BambuLab Matte Ivory White for the rest.