Cloud - Final Fantasy 7

Project: First Portrait.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.56mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #1c254c PLA BambuLab Matte Dark Blue  Transmission Distance: 0.2
    #ffffff PLA #BambuLab Matte Ivory White  Transmission Distance: 3.5
    #5d6578 PLA #BambuLab Basic Blue Gray  Transmission Distance: 3
    #7d6556 PLA BambuLab Dark Brown  Transmission Distance: 0.2
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.8
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3.2
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.6
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #9 (0.8mm) swap to BambuLab Matte Dark Blue
    At layer #11 (0.96mm) swap to #BambuLab Matte Ivory White
    At layer #12 (1.04mm) swap to #BambuLab Basic Blue Gray
    At layer #15 (1.28mm) swap to BambuLab Dark Brown
    At layer #17 (1.44mm) swap to BambuLab Basic Sunflower Yellow
    At layer #19 (1.6mm) swap to #BambuLab Matte Ivory White
    At layer #21 (1.76mm) swap to BambuLab Matte Mandarin Orange
    At layer #23 (1.92mm) swap to #BambuLab Matte Ivory White
    At layer #25 (2.08mm) swap to BambuLab Basic Turquoise
    At layer #27 (2.24mm) swap to #BambuLab Matte Ivory White for the rest.