Patron Tequila Display Box

If you find my designs interesting and useful, and would like to see more in the future, please consider giving me a boost and becoming a supporting member. 

Also, if you need parts for any of my designs, please use the BOM link provided on the model page when buying. This gives me a small commission.

Patron Tequila Folding door display box.

Time for a tequila box. And what better way to start then with the Patron!! 

If you're looking for small fast one hour prints, this isn't for you! This is a BIG one.

I went with the traditional green and gold color for my version. I added some limited edition artwork on the sides to make it stand out from all angles. And of course there is some bees here an there. 😊

With the Led Lamp Kit 001 in the base and KC007 lighting up the bottle from above, this box really makes for a great addition to your Homebar or Mancave.

If Tequila ain't your thing, check out my other models. Maybe there is a box that fit's your taste buds. 

Features

• LED Compatible: Includes a base specifically for the LED Lamp Kit 001 to give your bottle a golden glow.

                                  It also has a cutout in the top (ø65mm) to fit an LED to light up the bottle from above.

• Magnetic Snap: Use 8x2mm magnets to provide a satisfying, secure "click" when closing the doors.
• Assembly guide : Follow the detailed assembly guide below.
• Internal dimensions: 125x125x270mm 

Technical Specifications :

Hardware Required

• Steel Rods: 2 pcs (ø6mm x 300mm long)
• Magnets: 30 pcs Round 8x2mm (Required for door closure) Max strength N35
• Adhesive: CA Glue (Superglue) for magnets and final assembly.
• Lighting: Optional LED Lamp Kit 001 / KC007 or similar
• Filament : I used Bambu labs filament for this project.

Want it to look exactly like the photos? Use these filaments :

1.  Bambu Lab PLA Basic Mistletoe green
2.  Bambu Lab  PLA silk + Gold

3.  Bambu Lab PLA Matte charcoal (For the inside)

    

Assembly Tips

• Alignment: Ensure your steel rods are clean and straight for the smoothest door rotation.
• Supports :  Make sure all the supports are removed before assembly.
• Magnets : Be sure to orient the polarity of the magnets under assembly.
• Rod length : Before gluing the top on, double check that the rods aren't to long.
• Tolerance : Printers and filaments can behave differently. In rare cases, the holes can be a bit to tight because of settings.   If this happens, i recommend using a drill with a 6mm drill bit. Just run it through the hole a few times and you should be fine. 

You can find the steel rods you need here  →   (affiliate link)

If Bambu i out of stock, Led lamp kit 001 alternative → (affiliate link)

If Bambu i out of stock, KC007 alternative → (affiliate link)

8X2mm Magnets → (affiliate link) 

One's you have printed all the parts and acquired the accessories you need, just follow the assembly guide down below.

Each individual part is marked with a number, making it very easy to assemble.

When your done, it should look something like this.

Follow me if you want to see more of my designs in the future!