TARDIS Bookmark - WHO Hueforge

My love asked for a big custom bookmark, and told me to surprise her.

We're a whovian household so I thought… why not? 😁

   Here is my take on a novelty Decorative Bookmark. It has depth while remaining thin enough to make it functional as well. 

I didn't want to exaggerate any proportions, so I didn't oversize the signage. Note, not all text on this print is legible. Please be aware of this before printing and manage expectations 🙏😅.

   I really hope y'all enjoy it. It's only 3 colors so there is nothing to explain on this one. Just throw it on and in about an hour and a half you'll have your own. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 94.5x180mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.76mm

    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Blue  Transmission Distance: 4
    PLA BambuLab Basic Jade White  Transmission Distance: 5

This print uses 3 unique filaments. (This print has no blending dependencies whatsoever. You can use ANY brands you prefer on this one regardless of Transmission Distance / TD 👌)

Swap Instructions:
    Start with Black
    At layer #3 (0.32mm) swap to Blue
    At layer #7 (0.64mm) swap to Jade White
    At layer #15 (1.28mm) swap to Black
    At layer #17 (1.44mm) swap to Blue for the rest.