Anti-gravity Gyro
Print Profile(3)
Description
Boost Me (for free)
This is a highly enjoyable Print in Place anti-gravity gyroscope
Many ways to play await your discovery It can be spun on the ground in your hand or on a rope
It can spin on the ground for up to 2 minutes
This gyroscope is rope-driven so you will need to prepare a rope
This gyroscope is Print in Place and can be played immediately without assembly but it requires a lot of supports
It is recommended to print the AMS version which requires an AMS and uses dual material supports
If you cannot print the AMS version please print the non-AMS version
Due to variations in filament types and quality the support surface effects may vary so you can optimize the supports yourself
This model has 3 parts after printing the two parts other than the gyroscope body need to be connected with a rope
The connection point above the gyroscope uses 4 support pillars which can be removed by forcefully twisting the counterweight
Lubricant needs to be applied to the gyroscope's rotating connection point
This gyroscope is compatible with 5-10mm steel balls installing this steel ball base can increase its spin time
The base needs to be fixed with glue and the base should be perfectly straight with the gyroscope
Do not modify print parameters unless you are confident
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)