Barret Wallace - Final Fantasy 7

Project: 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 2
    #6f5034 PLA #BambuLab Basic Cocoa Brown  Transmission Distance: 0.3
    #3f8e43 PLA #BambuLab Basic Mistletoe Green  Transmission Distance: 5
    #ff0000 PLA BambuLab Basic Red  Transmission Distance: 4
    #f4ee2a PLA #BambuLab Basic Yellow  Transmission Distance: 6
    #ae835b PLA #BambuLab Matte Caramel  Transmission Distance: 1.5
    #e8dbb7 PLA #BambuLab Matte Desert Tan  Transmission Distance: 1.1
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #11 (0.96mm) swap to BambuLab Matte Ash Gray
    At layer #13 (1.12mm) swap to #BambuLab Basic Cocoa Brown
    At layer #14 (1.2mm) swap to BambuLab Basic Black
    At layer #15 (1.28mm) swap to #BambuLab Basic Mistletoe Green
    At layer #17 (1.44mm) swap to BambuLab Basic Red
    At layer #20 (1.68mm) swap to #BambuLab Basic Yellow
    At layer #23 (1.92mm) swap to #BambuLab Matte Caramel
    At layer #27 (2.24mm) swap to #BambuLab Matte Desert Tan for the rest.