Halo Hueforge
Print Profile(1)
Description
I make HueForge art, keychains, fridge magnets, and decorations. You have permission to sell my models (outside of Hungary). In return, please support me by rating and boosting my designs!
Boost Me (for free)
📐Hueforge Scaling / Resizing Note:
If you want to print this model larger or smaller, uncheck "Uniform Scaling" in your slicer.
- X & Y: Scale to whatever size you want.
- Z (Height): MUST remain at 100% (do not change the Z height!), otherwise the layer heights for color changes will break and the colors won't match.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 199.76x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA+ Sunlu Orange
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA+ Sunlu Blue Transmission Distance: 4
PLA BambuLab Basic Jade White
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Red
At layer #7 (0.64mm) swap to Orange
At layer #11 (0.96mm) swap to Lemon Yellow
At layer #14 (1.2mm) swap to Black
At layer #18 (1.52mm) swap to Blue
At layer #19 (1.6mm) swap to Jade White for the rest.
Check out my other HueForge prints, fridge magnets, and keychains too. Feel free to download and print them!
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)