Tifa Lockhart - Final Fantasy 7 - Free 3D Print Model

Search models, users, collections, and posts

Side Quest Hues

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

P1P

H2D Pro

P2S

X1E

X2D

X1 Carbon

A2L

H2C

H2S

H2D

0.08mm layer, 2 walls, 100% infill

Designer

3.5 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Project: 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.1
    #8e9089 PLA BambuLab Basic Gray Transmission Distance: 2
    #9d432c PLA #BambuLab Basic Brown Transmission Distance: 2
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #ae835b PLA #BambuLab Matte Caramel Transmission Distance: 1.5
    #e8dbb7 PLA #BambuLab Matte Desert Tan Transmission Distance: 1.1
    #eaffff PLA BambuLab Matte Ivory White Transmission Distance: 3.4
This print uses 7 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #8 (0.72mm) swap to BambuLab Basic Gray
    At layer #11 (0.96mm) swap to #BambuLab Basic Brown
    At layer #14 (1.2mm) swap to BambuLab Basic Red
    At layer #17 (1.44mm) swap to #BambuLab Matte Caramel
    At layer #21 (1.76mm) swap to #BambuLab Matte Desert Tan
    At layer #24 (2mm) swap to BambuLab Matte Ivory White for the rest.

tifa lockhart

tifa hueforge

tifa lockhart hueforge

tifa final fantasy 7