Riou - Suikoden 2

Project: Riou MW.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.48mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #4d3324 PLA BambuLab Matte Dark Chocolate  Transmission Distance: 0.1
    #b15533 PLA #BambuLab Matte Terracotta  Transmission Distance: 0.8
    #9d2235 PLA BambuLab Basic Maroon Red  Transmission Distance: 1.6
    #ff0000 PLA BambuLab Basic Red  Transmission Distance: 4
    #f4ee2a PLA #BambuLab Basic Yellow  Transmission Distance: 6
    #e8dbb7 PLA #BambuLab Matte Desert Tan  Transmission Distance: 1.1
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #10 (0.88mm) swap to BambuLab Matte Dark Chocolate
    At layer #13 (1.12mm) swap to #BambuLab Matte Terracotta
    At layer #14 (1.2mm) swap to BambuLab Basic Maroon Red
    At layer #18 (1.52mm) swap to BambuLab Basic Red
    At layer #21 (1.76mm) swap to #BambuLab Basic Yellow
    At layer #26 (2.16mm) swap to #BambuLab Matte Desert Tan
    At layer #28 (2.32mm) swap to BambuLab Matte Ivory White for the rest.