Quadruped Stalker - Nebula α
Print Profile(2)
Description
Boost Me (for free)
Guys, give me a free "little rocket", which will give me more motivation. Thank you for your support!
Membership
Choose your support: A quick tip or a commercial license to sell prints.
【Follow us, and we'll send you the latest designs as soon as they're available!】
Please make sure to apply glue or heat bed spray before printing. Don't let the first layer stick poorly or "fall off", which may result in incomplete or messy prints. If you're a beginner, we recommend you check out the "Tips for Beginners" at the bottom.
Apply super glue to the build plate, then print, to prevent parts from falling over
First read the assembly instructions, then proceed
Each model is meticulously designed, repeatedly tested, and optimized
If assembly is too loose or too tight, it is recommended to change the filament
Especially during the rainy season, damp filament greatly affects tolerances
For commercial use, please go to Makerworld. Subscribe to the commercial license Thank you for your support and respect
Note: All photos are taken with a mobile phone, not AI generated images; what you see is what you get
• 17 articulated joints, 58 parts
• Optional, 1-to-4 magnetic control lamp (cable length 5cm), available on Alibaba e-commerce
• Can seat minifigures
• If you like it, weapon modules will be updated later
Filament recommendations & installation instructions:
- Do not mix PLA and PETG, as tolerances will vary
- For rainy season, PLA is recommended (After PETG gets damp, it significantly affects tolerances)
- Different filaments have different sinkage rates, leading to variations in assembly tightness, you can use a hard surface to assemble the joints
- If installing the magnetic control lamp, please print the lamp sheets using transparent filament
- Joint parts have "same-direction locking teeth" and "opposite-direction locking teeth"; please identify carefully before assembling
- For all joints, please determine the direction of the locking tooth notch before force-fitting
- Again, please carefully review the graphic and animated instructions before proceeding with assembly
Although my output is not high, I strive for continuous improvement, and I hope for your continued liking and support
Installation instructions - Tap on your phone to load the GIF animation:
Graphic installation instructions
Boost Me (for free)
Guys, give me a free "little rocket", which will give me more motivation. Thank you for your support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)