Switch Fidget

The Switch Fidget is a compact sliding fidget toy designed to provide a smooth, satisfying tactile experience. Its simple yet addictive mechanism makes it perfect for keeping your hands busy, improving focus, or relieving stress during work, school, or everyday life.

Small enough to fit in your pocket, it's an ideal everyday carry (EDC) item that you can take anywhere.

If you enjoy this model, please consider leaving a ⭐ rating and sharing a photo of your print. Your support and feedback help inspire future designs.

Happy printing!

ASSEMBLY:

• Apply a small dab of glue to one of the magnet slots in BASE B and insert the first magnet.

• Once the glue has set, repeat with the second magnet.

  • Latching switch: Install the second magnet with the same magnetic orientation as the first.
  • Momentary switch: Reverse the magnet's orientation before gluing it in.

  Hold the magnet in place for a few seconds while the glue grabs, as the magnets may try to pull each other out.

• After the magnets have fully cured, place a small amount of glue in the centre of BASE B and attach BASE A on top. Hold the parts together for a few seconds until the glue begins to set.
• Place BUTTON A onto BASE A (making sure BASE B is facing down). Add a small drop of glue to the magnet recess and insert the third magnet. The magnets already installed in the base will naturally pull it into the correct orientation.
• Once the magnet is secure, apply a small drop of glue to the top of BUTTON A and attach BUTTON B. Hold it in place for a few seconds until the glue sets.
• Finally, slide the CASING over the assembled button and base. It is designed as an interference fit and should lock into place using the small retaining lip on BASE B.