Filament Painting of Björk, female icelandic singer & artist
Thin print, 5 colors, approx. 23x22cm.
Be sure to swap AMS Slot 1 from black to white after black finished printing (if you work with one AMS).
If you switch colors manually: the last color is white
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA Default White Transmission Distance: 5
Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Dark Blue
At layer #10 (0.88mm) swap to Marine Blue
At layer #14 (1.2mm) swap to Lilac Purple
At layer #19 (1.6mm) swap to White for the rest.