Into Darkness Series Bookmark

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Ready to dive Into Darkness? 🖤 No matter if you're on Lights Out, Caught Up, or Game On, this bookmark has the entire Navessa Allen trilogy covered.

Pictures shown are printed in an 0.4mm Nozzle
 

This print uses 4 unique filaments:

    PLA BambuLab Basic Black Transmission Distance: 0.6

    PLA BambuLab Basic Cyan Transmission Distance: 1.8

    PLA BambuLab Basic Hot Pink Transmission Distance: 3.9

    PLA BambuLab Basic BambuLab Green Transmission Distance: 4

Swap Instructions: Not applicable. This is a style for which colors are already assigned in the STLs. Since this print has at times multiple colors on a layer, an AMS is required.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print.

Stringing may occur with Hueforge, just use a lighter to whisk them away. 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections