Yoruichi Shihoin - Bleach

Project: 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #482960 PLA #BambuLab Basic Indigo Purple  Transmission Distance: 2
    #cd007b PLA BambuLab Basic Magenta  Transmission Distance: 3
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
    #6f5034 PLA #BambuLab Basic Cocoa Brown  Transmission Distance: 0.3
    #ff0000 PLA BambuLab Basic Red  Transmission Distance: 4
    #f4ee2a PLA #BambuLab Basic Yellow  Transmission Distance: 6
    #ae835b PLA #BambuLab Matte Caramel  Transmission Distance: 1.5
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #8 (0.72mm) swap to #BambuLab Basic Indigo Purple
    At layer #9 (0.8mm) swap to BambuLab Basic Magenta
    At layer #10 (0.88mm) swap to BambuLab Basic Black
    At layer #11 (0.96mm) swap to BambuLab Matte Ivory White
    At layer #12 (1.04mm) swap to #BambuLab Basic Cocoa Brown
    At layer #13 (1.12mm) swap to BambuLab Basic Red
    At layer #16 (1.36mm) swap to #BambuLab Basic Yellow
    At layer #18 (1.52mm) swap to BambuLab Matte Ivory White
    At layer #19 (1.6mm) swap to #BambuLab Basic Cocoa Brown
    At layer #21 (1.76mm) swap to #BambuLab Matte Caramel
    At layer #22 (1.84mm) swap to BambuLab Matte Ivory White
    At layer #23 (1.92mm) swap to #BambuLab Basic Yellow
    At layer #26 (2.16mm) swap to BambuLab Matte Ivory White for the rest.