Flexible Dragonite Pokémon Fidget Keychain / Toy
Print Profile(1)
Bill of Materials
Description
Boost Me (for free)
Thank you so much for the Boost! Glad you like it. I hope you can share a picture if you print it! 🚀
Welcome to the Wiggle-Zone!
Bring home everyone's favorite chubby orange dragon in a whole new way. This is a fully Print-in-Place Articulated Dragonite. No assembly required, no messy supports—just print, remove from the bed, and enjoy the satisfying wiggle!
It’s an amazing fidget toy for Pokémon fans, a cute desk companion, or a unique gift. It has been meticulously designed with interlocking segments that ensure smooth movement from head to tail.
📥 Print Profile & Recommended Settings
Please note: For best results, use the provided print profile. If you slice it yourself, follow the settings below:
- Material: PLA (works best for tight tolerances and smooth movement).
- Layer Height: 0.16 mm or 0.20 mm.
- Infill: 5% – 15% (Gyroid or Grid pattern recommended).
- Walls / Perimeters: 2-3 Walls (essential for strong, durable joints).
- Supports: No required! But if you have problems you can enable them!
- Bed Adhesion: A Brim or Skirt is recommended if you experience bed adhesion issues, as the tail tip is relatively small.
- Print Speed: Moderate to slow speed for the first layer to ensure the small individual segments stick properly to the build plate.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)