Mountain Coasters by Bamingo Design

Bamingo Design

Household>Decor

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.08mm layer, 2 walls, 100% infill

Designer

4.2 h

2 plates

5.0(44)

4 color, 0.08mm layer, 2 walls, 100% infill

1.4 h

1 plate

0.08mm layer, 2 walls, 100% infill

5 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

368

759

115

910

582

Released

Description

🏔 From peak to table: Experience the mountains with every sip! Crafted to bring the essence of the peaks right to your table.
👶 Easy to Print: No need for (AMS) or (MMU). Only one manual filament swap is needed to complete the model.
⭐ Join Our Exclusive Memberships:
Get a Commercial License to sell prints or access an exclusive personal-use library. Learn more at bamingodesign.com
Technical Specifications:
📏 Size: 10 cm
🔧 Print Settings:
- Coasters: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
- Coaster Holder: No support needed. Optimal with a layer height of 0.20 mm and 15% infill for a balance of strength and material efficiency.
🌈 Color Changes:
- Start with Black
- At layer #14 (1.20 mm), change to White for the rest.
📋 Assembly and Usage Tips:
- Alternatively, use our ready-to-print 3MF file to automate these steps.
- You can right-click on the model and select 'Split to Objects.' to print them separately.
- Don’t simplify the model and ignore the "floating regions" warning.
- If you encounter stringing issues, you can use a heat gun to remove them.

Comment & Rating (115)

@merophosis

The print profile is no longer public

came out awesome!

@BamingoDesign

They look great!

@ontheriver

The print profile is no longer public

Printed great, wish it was a little thicket/sturdier like your others,but that a minor thing.

@BamingoDesign

Sorry about that, it seems like you printed an older version. The updated, thicker model is already there but might have been missed due to an ordering mix-up. I'll sort it out and update the listings as soon as possible. Thanks for letting me know!

@manfredierre

The print profile is no longer public

perfect

@NotForEveryone

The print profile is no longer public

this is a hard rating to give. the design here is amazing and they look good. the issue is these are nearly paper thin on many spots and bend very easy and do not work well as coasters because of that. when you put the cork backing on them it allows even more flex. these should be at least 3mm thick and just are not. the thinist part is less than 0.5mm thick, only a few layers. again the design is awesome but functionally they need to be thicker as an option.

@BamingoDesign

Thank you for your feedback. I agree with your suggestion about thickness; newer models are indeed thicker, and I'll be also adding thicker versions of this model soon. Your input is greatly appreciated.

@integratype9001

Boosted

came out great! love it. thank you.

@yandalf

Print Profile

0.08mm layer, 2 walls, 100% infill

Very nice print!

@Ghost_ITR

The print profile is no longer public

Good print. The coasters were a little rough around the edges but after a light sanding they're fine

@tdulny

The print profile is no longer public

mega super model, my family love it , easy print !

@JackONeill

The print profile is no longer public

good print

@Ghato

Print Profile

0.08mm layer, 2 walls, 100% infill

Came out nicely. Tried to add some color to it but sadly it's not working with anything else than 2 main colors.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License