Freddy From the Furnace - Free 3D Print Model

Search models, users, collections, and posts

Side Quest Hues

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

X2D

P2S

P1P

H2D Pro

A2L

X1 Carbon

H2S

X1E

H2C

H2D

0.08mm layer, 2 walls, 100% infill

Designer

5.4 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Project: Freddy 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.08mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.1
    #5d6578 PLA #BambuLab Basic Blue Gray Transmission Distance: 3
    #434b2f PLA BambuLab Matte Dark Green Transmission Distance: 0.2
    #9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
    #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 5.6
    #f99963 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3.2
    #f4ee2a PLA #BambuLab Basic Yellow Transmission Distance: 6
    #eaffff PLA BambuLab Matte Ivory White Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #10 (0.88mm) swap to #BambuLab Basic Blue Gray
    At layer #13 (1.12mm) swap to BambuLab Matte Dark Green
    At layer #14 (1.2mm) swap to BambuLab Basic Black
    At layer #15 (1.28mm) swap to BambuLab Basic Maroon Red
    At layer #18 (1.52mm) swap to BambuLab Basic Orange
    At layer #20 (1.68mm) swap to BambuLab Matte Mandarin Orange
    At layer #23 (1.92mm) swap to #BambuLab Basic Yellow
    At layer #25 (2.08mm) swap to BambuLab Matte Ivory White for the rest.

freddy kreuger

freddy hueforge

nightmare on elmstreet

nightmare on elm street hueforge