Batman - Bane's Back Breaker - 4C

I made this one in particular for my brother in law who's a fairly big batman fan, hope he enjoys it, wonder if he'll ever find this one since my little sister follows this page haha.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #5d6578 PLA #BambuLab Basic Blue Gray  Transmission Distance: 3
    #ae835b PLA BambuLab Matte Caramel  Transmission Distance: 1.5
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 4 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #9 (0.8mm) swap to #BambuLab Basic Blue Gray
    At layer #18 (1.52mm) swap to BambuLab Matte Caramel
    At layer #21 (1.76mm) swap to BambuLab Matte Ivory White for the rest.