Otter Pop / Freeze Pop Push-Up Holder – Standard

Freeze pops have two problems: frozen fingers and that last melty third that slides down the tube and drips everywhere. This fixes both.

A rigid insulating sleeve keeps your hand warm, and a push-up piston (like a push-pop) advances the pop as you eat. No more squeezing a floppy tube. Melt drains through the piston into a built-in drip reservoir in the base. Snip the top, drop it in, done.

Fits standard ~34mm pops: Otter Pops, Fla-Vor-Ice, most store brands. Channel is 37×18mm inside. Verify against your box, brands vary.
 

Parts (all support-free):

• Sleeve - insulated grip, drip reservoir base, flared knuckle rim
• Push-up piston - slides in from the top, thumb tab rides the rear slot, drain holes let melt through
• Snap-on lid - caps the rim for freezer → pool transport

Features:

• Stands upright on the counter; flat faces + nesting groove so it lies in the freezer door without rolling
• Flared rim stops the cut wrapper sliding down inside
• Lanyard hole for pool-party kids with butterfingers (Optimal Lanyard: Amazon.com: Styquenzer 9 Pack Neck Lanyard for Keys Color, Neck Strap Lanyard, Long Thin Neck Straps for Pens, Mobile Phones, Keys, Cards, Whistles 17.32 Inch Lanyard with String Loop (9 Colors) : Office Products)

Print in PETG or PP, NOT PLA. This lives in freezers, coolers, and hot cars. PLA gets brittle at freezer temps and sags in a hot car.

Hand wash. Pop stays in its wrapper, so food contact is incidental.
 

Other sizes:
Jumbo (50mm Fla-Vor-Ice Giant): Otter Pop Push-Up Holder – Jumbo (Fla-Vor-Ice) - Free 3D Print Model - MakerWorld
Mini — sleeve-only quick print: Otter Pop Sleeve + Drip Catcher – Mini - Free 3D Print Model - MakerWorld
 

Assembly: insert piston from the top, tab aligned to the slot, push to the bottom stop. Thumb up as you eat.