goku ssj hueforge 200x200mm

Goku super saiyan! very happy how this one turned out. side profile with a great paint brush touch. Hopefully you enjoy!

Project: goku 200x200.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm

The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#8e9089 PLA BambuLab Basic Gray Transmission Distance: 2

#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5

#ff6a13 PLA BambuLab Basic orange Transmission Distance: 5.6

#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6

#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 6 unique filaments

Swap Instructions:

Start with Black

At layer #12 (1.04mm) swap to Gray

At layer #16 (1.36mm) swap to Cyan

At layer #18 (1.52mm) swap to orange

At layer #25 (2.08mm) swap to Yellow

At layer #30 (2.48mm) swap to Ivory White for the rest.