Superman - Free 3D Print Model

Search models, users, collections, and posts

Side Quest Hues

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

H2C

H2S

P2S

X1 Carbon

H2D

X2D

A2L

P1P

X1E

H2D Pro

0.08mm layer, 2 walls, 100% infill

Designer

6 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Project: Attempt 2 if 1 doesn't work.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.1
    #5d6578 PLA #BambuLab Basic Blue Gray Transmission Distance: 3
    #042f56 PLA BambuLab Matte Dark Blue Transmission Distance: 0.2
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #f7d959 PLA #BambuLab Matte Lemon Yellow Transmission Distance: 4
    #0056b8 PLA #BambuLab Basic Cobalt Blue Transmission Distance: 5
    #eaffff PLA BambuLab Matte Ivory White Transmission Distance: 3.4
This print uses 7 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #8 (0.72mm) swap to #BambuLab Basic Blue Gray
    At layer #9 (0.8mm) swap to BambuLab Matte Dark Blue
    At layer #10 (0.88mm) swap to BambuLab Basic Red
    At layer #14 (1.2mm) swap to #BambuLab Matte Lemon Yellow
    At layer #17 (1.44mm) swap to #BambuLab Basic Cobalt Blue
    At layer #21 (1.76mm) swap to #BambuLab Basic Blue Gray
    At layer #22 (1.84mm) swap to BambuLab Matte Ivory White for the rest.