Spike Spiegel - Cowboy Bebop - Free 3D Print Model

Search models, users, collections, and posts

Side Quest Hues

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

A2L

X1E

P2S

P1P

H2S

H2C

H2D

X2D

X1 Carbon

H2D Pro

0.08mm layer, 2 walls, 100% infill

Designer

5.6 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Project: CB 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

    #080a0d PLA BambuLab Basic Black Transmission Distance: 0.3
    #00358e PLA BambuLab Basic Blue Transmission Distance: 1.9
    #5b6579 PLA Bambulab Basic Blue Gray Transmission Distance: 1.9
    #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
    #3f8e43 PLA #BambuLab Basic Mistletoe Green Transmission Distance: 5
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #f7d959 PLA #BambuLab Matte Lemon Yellow Transmission Distance: 4
    #eaffff PLA BambuLab Matte Ivory White Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #10 (0.88mm) swap to BambuLab Basic Blue
    At layer #11 (0.96mm) swap to Bambulab Basic Blue Gray
    At layer #12 (1.04mm) swap to BambuLab Basic Pumpkin Orange
    At layer #14 (1.2mm) swap to #BambuLab Basic Mistletoe Green
    At layer #17 (1.44mm) swap to BambuLab Basic Red
    At layer #21 (1.76mm) swap to BambuLab Basic Pumpkin Orange
    At layer #22 (1.84mm) swap to #BambuLab Matte Lemon Yellow
    At layer #23 (1.92mm) swap to BambuLab Matte Ivory White for the rest.

cowboy bepop

spike spiegel

spike spiegel hueforge

cowboy bepop hueforge