Verity Minecraft

Bring the unsettling Verity Monster into the real world with this detailed 3D printable display figure.

The model captures Verity’s most recognizable characteristics: extremely long limbs, a thin humanoid body, visible anatomical details and its signature disturbing smile. It works perfectly as a horror decoration, collector’s figure, Halloween display or creepy addition to a gaming setup.

The included 3MF file is already positioned horizontally on the build plate and prepared for printing on the Bambu Lab A1 mini with a 0.4 mm nozzle.

MODEL FEATURES

• Highly detailed humanoid horror figure
• Distinctive oversized smile
• Long arms and legs
• Single-piece model
• Optimized horizontal printing orientation
• Suitable for PLA and similar materials
• Ideal for painting and post-processing
• No AMS or multi-color system required

APPROXIMATE MODEL SIZE

X: 55 mm
Y: 156 mm
Z: 36 mm

The model can be scaled up. Be careful when scaling it down because the fingers, limbs and facial details are relatively thin.

RECOMMENDED PRINT SETTINGS

• Printer: Bambu Lab A1 mini
• Nozzle: 0.4 mm
• Layer height: 0.08 mm
• Material: PLA
• Nozzle temperature: 220 °C
• Build plate temperature: 60 °C
• Walls: 2
• Infill: 15%
• Infill pattern: Grid
• Supports: Tree Supports – Auto
• Supports on build plate only
• Critical regions only
• Brim: 5 mm Auto Brim
• Build plate: Textured PEI Plate

PRINTING NOTES

Remove the supports carefully, especially around the hands, fingers, face and thin limbs. Flush cutters and small precision pliers are recommended.

For a cleaner surface, the support contact points can be lightly sanded before applying primer and paint.

A darker base coat combined with yellow, brown and green dry-brushing works particularly well for creating an aged and unsettling skin effect.

This is a fan-made display model and is not an official product or toy. The thin limbs and fingers may break if handled roughly. Keep away from small children.

Show your finished print and share your preferred color combination in the comments.

This is an unofficial, fan-made 3D model (fan art). All rights to the character, design, and associated franchise depicted belong solely to the original creators, rights holders, and publishers. This model was created out of pure fan passion and is intended exclusively for private, non-commercial use. Selling these 3D files or the resulting physical models is not permitted.

🧩 Quality & Feedback
• Please post a "Make" with a photo – this helps others and improves visibility.
• Feedback/Issues: Briefly state: Printer, material, layer height, temperature, photo of the problem area.

📄 License / Usage
• Private use according to the model license.
• Commercial use (sales/shop/production) only with an appropriate commercial license membership.

🛠️ Troubleshooting (Briefly)
• Stringing: Lower temperature slightly + check retraction/travel.
• Elephant's foot: Reduce first layer flow/temperature or use Elephant-Foot Compensation.
• Connector too tight: Check calibration/flow, do not scale; if necessary, lightly sand.

My Setup – for a better overview and as a transparent insight into my current equipment. This is how my personal work and technology setup is presented.