Search models, users, collections, and posts
HoneyBee
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
3.5 h
1 plate
Open in Bambu Studio
Boost
1
2
0
1
0
0
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#5ec4ea PLA Overture Matte Light Blue Transmission Distance: 1.8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Pumpkin Orange
At layer #13 (1.12mm) swap to Yellow
At layer #22 (1.84mm) swap to Light Blue for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)