TMNT Leonardo

Hueforges can be resized, only change the X and Y scale, leave the Z height the same.

TMNT Leonardo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.84mm

PLA BambuLab Basic Black  Transmission Distance: 0.6
PLA BambuLab Basic Blue  Transmission Distance: 4
PLA+ Sunlu Grey  Transmission Distance: 3.2
PLA Elegoo White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #15 (1.28mm) swap to Grey
At layer #17 (1.44mm) swap to White for the rest or

Border Only Colors. 
At layer #23 (1.92mm) swap to Blue or any color for the rest.

If you have any requests on a new Hueforge, feel free to ask — I’ll see what I can do!