Philodendron Melanochrysum self watering planter
Print Profile(4)
Description
Boost Me (for free)
# 🌿 Philodendron Melanochrysum Self-Watering Pot Set – S, M, L & XL
This set was specially designed so that the pots **do not need to be scaled**
Anyone who has ever scaled decorative plant pots with elaborate leaf motifs knows the problem: wall thicknesses change, details become messy, and the design loses its impact. That's why you get four separately adapted sizes here, each specifically optimized for its size
Each pot features a three-dimensionally crafted **Philodendron Melanochrysum leaf**, which stands out particularly well with single-color prints and gives the pots their characteristic look
---
# 💧 Self-Watering System
All sizes are designed for use as a self-watering pot
The actual plant pot sits in the upper section. Below it is a separate water reservoir
A capillary wick, guided through the bottom openings of the orchid or aroid pot, allows the plant to independently draw water from the reservoir. This ensures a consistent water supply and significantly extends watering intervals
For all sizes, care has been taken to ensure that the inner pots can be easily removed from above without having to manipulate them inside the pot
---
# 👀 View Window (optional)
On the back, there is a view window through which the water level and root development can be easily monitored without having to remove the inner pot
The view window is designed as an optional negative and can be activated or deactivated in Bambu Studio as needed
With View Window
✅ Water level control
✅ Root development control
✅ Ideal for orchids, alocasias, and other aroid plants
Without View Window
✅ Closed outer wall
✅ Use as decoration
✅ Use as a vase
✅ Use as a pen holder
✅ Use as a general storage container
---
# 📏 Sizes
Size S
* Fits a clear orchid pot with **6 cm diameter**
* Water reservoir: **100 ml plastic cup**
* Capillary wick can be easily guided through the orchid pot
* Easy insertion and removal of the inner pot
---
Size M
* Fits a clear orchid pot with **7.6 cm diameter**
* Water reservoir: **200 ml plastic cup**
* Capillary wick can be easily guided through the orchid pot
* Easy insertion and removal of the inner pot
---
Size L
* Fits a clear orchid pot with **9 cm diameter**
* Water reservoir: **400 ml plastic cup**
* Capillary wick can be easily guided through the orchid pot
* Ideal for larger plants with higher water requirements
---
Size XL
* Fits a **10 cm aroid pot**
* The aroid pot is deeper and intentionally protrudes slightly above the upper edge
* This makes removing the inner pot particularly convenient
* Water reservoir: **500 ml plastic cup**
* Capillary wick can be easily guided through the aroid pot
for example:
Cups:
https://www.variegata.de/produkt/toepfchen-der-toepfe/
AROID POTS
https://www.sybotanica.com/de-de/products/dursichtiger-plfanzentopf
S and M
9 cm clear orchid pot
---
# ⚠️ Important Note
The print files exclusively contain the decorative outer pots
The following components are **not part of the STL files**:
* Orchid pots
* Aroid pots
* Plastic cups for the water reservoirs
* Capillary wick
These components must be procured separately
The required orchid pots, aroid pots, plastic cups, and capillary wicks are readily available from the big A
The outer pots serve as a decorative casing and transform simple planters into a visually appealing self-watering system
---
# 🖨️ Print Instructions
* No scaling required
* Each size has been separately adapted
* Optimized wall thicknesses for each size
* Optimized leaf details for each size
* Suitable for PLA, PLA+, PETG, and comparable materials
* A fine layer height is recommended for optimal results
---
# 📜 License
These files are generally intended exclusively for private use
Not permitted:
❌ Sale of digital files
❌ Distribution of digital files
❌ Distribution of files on other platforms
❌ Sale of printed copies
❌ Commercial use of any kind
By downloading, you agree to these terms
# 📜 License
A commercial license can be acquired through Makerworld as part of a commercial membership
Membership
# 📜 License
---
All product images are personally photographed by me at home at the dining room table and are not AI-generated renderings
I show the printed models as they actually come from the printer – without artificial embellishments or unrealistic representations
Before publication, each file is personally test-printed by me in all offered sizes to ensure accuracy of fit, printability, and the best possible result. This way, you can confidently download and print the models directly
---
# ❤️ Support
If you like my models, I would be delighted to receive a like, a make, or a photo of your print
It's especially nice to see which plants have found a new home in the pots
If you share your prints on social media, I would be thrilled if you could link to me:
📸 **Instagram: @marbledjungle**
🎵 **TikTok: @marbledjungle**
Thank you very much for your support and happy printing! 🌿
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)