Smoggy3D

cover

split2.jpg

split3.jpg

render.png

Black Parts

plate_1.png

White Parts

plate_2.png

6b08ed56ddb00349.jpg

No AMS needed!Parts need to be glued in.

Separate Parts, 0.12mm layer, 2 walls, 10% infill

ams1.jpg

AMS, 0.16mm layer, 2 walls, 10% infill

The Endless River

PXL_20260711_170952202~2.jpg

PXL_20260711_171133476~2.jpg

PXL_20260711_170939327~2.jpg

PXL_20260711_171147797~2.jpg

Identical to the original with split parts, but everything is on a single plate for both speed and convenience.&nbsp;This layout is optimized for the X/P series. There are separate profiles for the A series and H series.&nbsp;NOTE: Unfortunately, MakerWorld handles “print by object” profiles exceptionally poorly and only shows compatibility for the printer from which a profile is saved. If the Handy app doesn’t show it as compatible for yours due to this, open the 3MF in Bambu Studio instead and it should be ready to go, or use Auto Arrange to further optimize for your exact setup.<ul style="list-style-type: disc"><li>Should go without saying, but an AMS is required — unless you add pauses and manually swap filament between objects.</li><li>Be sure the print sequence remains “Print by Object” or you&#39;ll unnecessarily go through a lot of filament and waste a lot of time, completely defeating the purpose of this profile.</li></ul>If you like this profile, please remember to rate it, boost the designer and explore their other models. If you really like this profile, feel free to <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@TheEndlessRiver/upload">check out my models</a> as well and boost one (or more) of them if you have boosts to spare. 😊

Separate parts, one plate, X/P series w/AMS — fast & easy!

Identical to the original with split parts, but everything is on a single plate for both speed and convenience.&nbsp;This layout is optimized for the H2S w/ AMS, H2D, and H2C. There are separate profiles for the A series and the X/P series.&nbsp;NOTE: Unfortunately, MakerWorld handles “print by object” profiles exceptionally poorly and only shows compatibility for the printer from which a profile is saved. If the Handy app doesn’t show it as compatible for yours due to this, open the 3MF in Bambu Studio instead and it should be ready to go, or use Auto Arrange to further optimize for your exact setup.<ul style="list-style-type: disc"><li>An AMS is required with the H2S — unless you add pauses and manually swap filament between objects. Obviously any dual-head printer can handle it as-is.</li><li>For the H2S, be sure the print sequence remains “Print by Object” or you&#39;ll unnecessarily go through a lot of filament and waste a lot of time, completely defeating the purpose of this profile.</li></ul>If you like this profile, please remember to rate it, boost the designer and explore their other models. If you really like this profile, feel free to <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@TheEndlessRiver/upload">check out my models</a> as well and boost one (or more) of them if you have boosts to spare. 😊

Separate parts, one plate, H series — fast & easy!

Identical to the original with split parts, but everything is on a single plate for both speed and convenience.&nbsp;This layout is optimized for the A Series. There are separate profiles for the X/P and H series.&nbsp;NOTE: Unfortunately, MakerWorld handles “print by object” profiles exceptionally poorly and only shows compatibility for the printer from which a profile is saved. If the Handy app doesn’t show it as compatible for yours due to this, open the 3MF in Bambu Studio instead and it should be ready to go, or use Auto Arrange to further optimize for your exact setup.<ul style="list-style-type: disc"><li>Should go without saying, but an AMS is required — unless you add pauses and manually swap filament between objects.</li><li>Be sure the print sequence remains “Print by Object” or you&#39;ll unnecessarily go through a lot of filament and waste a lot of time, completely defeating the purpose of this profile.</li></ul>If you like this profile, please remember to rate it, boost the designer and explore their other models. If you really like this profile, feel free to <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@TheEndlessRiver/upload">check out my models</a> as well and boost one (or more) of them if you have boosts to spare. 😊

Separate parts, one plate, A Series w/AMS — fast & easy!

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

🐶 Knitted Border Collie 🐶&nbsp;No AMS needed! Parts need to be glued in.

Knitted Border Collie Dog

ASIA

Print Profile(5)

Bill of Materials

Description

Comment & Rating (15)

License

Related Models