Round display case TFT1.28 GC9A01 DIY BambuHelper
Print Profile(1)
Bill of Materials
Description
Case for 1.28" round GC9A01 TFT display, part of BambuHelper - open-source ESP32 monitor for Bambu Lab printers (real-time temps, progress, AMS status).
All printers supported. Cloud mode and LAN.
Flash firmware straight from browser, no IDE needed:
https://keralots.github.io/BambuHelper/
Pick your board from dropdown (esp32c3_round or esp32s3_round for this display) - wiring diagram included on same page.
Full project + source: https://github.com/Keralots/BambuHelper
You'll need 2x M2 screws, 6mm length. Alternatively glue both parts together.
Case kept small on purpose, so you'll need to slightly bend display pins as shown in the picture.
Wire I used to solder ESP to display (AWG32):
https://pl.aliexpress.com/item/1005007651756810.html
Case assembly video:
3 Skins available:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)