Rengoku Flames 200x200mm hueforge

Rengoku Flames! demon slayer hot off the press. 

Project: Rengoku Flames.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm

The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mm

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

#ff985d PLA BambuLab Basic Orange Transmission Distance: 5.1

#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #11 (0.96mm) swap to Red

At layer #19 (1.6mm) swap to Basic Orange

At layer #23 (1.92mm) swap to Yellow

At layer #26 (2.16mm) swap to Jade White for the rest.