Silverhawks 200x200 hueforge

Silverhawks! been wanting to print for a while. One of my favorites. hopefully you enjoy it also. More to come

Project: silverhawks.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm

The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3

#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

#ff6a13 PLA BambuLab Basic orange Transmission Distance: 5.6

#d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2

#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5

#00358e PLA BambuLab Basic Blue Transmission Distance: 4

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 8 unique filaments

Swap Instructions:

Start with Black

At layer #12 (1.04mm) swap to Blue Gray

At layer #18 (1.52mm) swap to Red

At layer #20 (1.68mm) swap to orange

At layer #23 (1.92mm) swap to Latte Brown

At layer #26 (2.16mm) swap to Cyan

At layer #29 (2.4mm) swap to Blue

At layer #31 (2.56mm) swap to Jade White for the rest.