10 inch Rack 2U: ATX PSU + 2x 2.5" HDD

⚒️ No 3D printer? No time to source components?
I just opened my own e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙️.
📦 Shipping across the EU: 👉 Get it at NautilusForge.shop

Design:

• 10" rack, 2U element for ATX PSU & 2x 2.5 HDD
  • ATX opening: 150mm x 86mm with 0.4mm additional tolerances
  • All 4 variations available, choose the one you want
• HOT SWAP is possible. I really wanted that feature and couldn't find it anywhere on printable/makerworld
• maximum airflow
• Following feedback the mounting of the SATA connector as been redesigned. I also added 2 Keystones on the side following a comment about it.

Print:

• No support ! Print face down
• Print profil optimised

Other Material:

I use those dell-copy caddies from Aliexpress:

keywords:

• “NEW 08FKXC 2.5'' SAS SATA Server Tray Caddy for Dell PowerEdge R730 R630 T640 T630 HARD DRIVE Bracket 8FKXC”
• "2 PCS NEW 2Pcs/Lot 08FKXC 2.5'' SAS SATA Server Tray Caddy for Dell PowerEdge R730 R630 T640 T630 HDD Bracket Drawer 8FKXC G176J"

2pack tray sells for about 9eur:

• here in Aliexpress or
• here in Aliexpress too 

For the Hot swappable connection:

I used those:

keywords: SATA Male To Female Power Data Converter 22Pin 7+15 Male To Female SATA To SATA Converter SATA To SATA Adapter

Currently 6eur for 5: 

• Here on aliexpress

Screws are listed in the BOM:
- Self tapping HEX M3x12m button head, also easily available on aliexpress
 
For the ATX, you know what to do! 150mm x 84mm with 0.4mm additional tolerances
 

Hope it helps !