Fruit fly trap
Print Profile(1)
Description
If you enjoy my models or find them helpful, please consider to like, rate, boost or leave a comment.
Boost Me (for free)
A boost would mean a lot — thanks for the support!
Fruit fly small trap
- Size: 6 × 4.5 cm
- Includes 2 different versions in the profile.
- To use: pour some cider vinegar into the container, then add a little sugar and a drop of dish soap.
- Apply a clear coat inside the container to prevent leaks — especially recommended for PLA and PETG prints.
Based on user feedback, the following print settings can improve waterproofing:
- Layer Height: 0.16 mm
- Wall Thickness: 0.6 mm (Outer/Inner)
- 4 walls
- Infill/Wall Overlap: 35%
- Flow Rate: 1.05
- Recommended clear coat: Motip Rallye Clear Varnish 500ml
- No supports required.
Boost Me (for free)
If you like my models or find them helpful, a boost would mean a lot — thanks for the support!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)