[KR] Deckers insert

This is an organizer custom-made for the Deckers package case released in Korea

[Related Model Recommendation]

• Deckers Token Edge Cover (3D Printed covers applied to each token in the image above)

  ( https://makerworld.com/ko/models/3021776-deckers-token-edge-cover#profileId-3395041 )

   

[Key Features]

• Individual storage compartments for each component type
• Accommodates sleeved cards (Boardpia add-on, based on 0.07mm thick sleeves, sizes 65x91mm, 90x127mm)
• Internal height clearance for rulebook storage (approx 2mm)
• Designed with a hinged cover for the token box, allowing the game box to be stored vertically (requires 3x2mm magnets)

(Caution: The hinge part of the case is thin, so applying excessive force may easily damage the lid's hinge)

[Additional Information]

1. Insert 3x2mm magnets into the hinge cover's fixing points for the token boxes using adhesive (allows for secure storage)

2. For the main card tray, you can attach nameplates to indicate the storage location for each card

   (A 6mm label printer can be used for name tags as an alternative to 3D Printed nameplates)

    

※ If the bottom part appears fused when printing the case,

carefully fold it using the hinge part; the fused area is thin and should detach relatively easily

(For smooth hinge operation, 0.12mm layer printing is recommended)

※ Please note that this method utilizes Bambu Studio's top/bottom layers 0 and infill print settings

(If printing with other slicers, please configure the infill settings separately)

( + If you are concerned about the durability of the mesh part, you can reset the print settings for that specific object to print it as a solid form.)