SK Rapid Vienna Green-White Graffiti Hueforge
Print Profile(3)
Description
Rapid Vienna Green-White Graffiti Hueforge
I hope you like it! Subscribe to me so you don't miss any new uploads!
Select the desired size in the print profile. I have created profiles for 200x200, 150x150, and 100x100 mm.
You can also scale the model as desired along the X and Y axes. The Z-axis must NOT be changed!
This image contains five colors. For black and white, I choose the same slot in the AMS. After the printer finishes with black, the spool with white filament goes into this slot. This means that more than four colors are also not a problem with an AMS. Don't worry - try it out!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.64mm
Filaments Used:
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
#3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Scarlet Red
At layer #11 (0.96mm) swap to Mistletoe Green
At layer #22 (1.84mm) swap to Sunflower Yellow
At layer #27 (2.24mm) swap to Ivory White for the rest.
Boost Me (for free)
If you like my creation, please support me with a small boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)