Butterfly Knife Remixed by Roland Deschain

Remixed by

Roland Deschain

Props & Cosplays>Replica Weapon

Print Profile(7)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

(Standard) 0.2mm layer, 2 walls, 15% infill

Designer

1.6 h

1 plate

4.8(154)

(Mega Strong) 0.16mm layer, 12 walls, 100% infill

Designer

2.2 h

1 plate

4.8(84)

(Strong) 0.2mm layer, 4 walls, 25% infill

Designer

1.8 h

1 plate

4.6(33)

One set, regular print, 0.2mm layer, 2 walls, 15% infill

1 h

1 plate

4.2(22)

Click to see more

Boost

321

447

350

2 k

3.1 k

Released

Description

This was a beautiful model originally created by Tirubo.

Unfortunately the original meshes were severely broken so I faithfully recreated them.

Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.

If you like this project, please don't forget to ❤ Like and ★ Rate!

Printing Tips

0.4mm nozzle and 0.20mm layer height.
Print in the orientation provided in the STLs for the strongest results
Support is required

Functional print

4 perimeter walls
50% gyroid infill
5 top/bottom layers

knife

butterflyknife

Comment & Rating (350)

@hfts.rider

Print Profile

(Standard) 0.2mm layer, 2 walls, 15% infill

Great model

(Edited)

@user_627839216

Which one is that? Where did that blade and handle come from?

@hfts.rider

Replying to @user_627839216 :

Sorry, I uploaded the wrong photo, that one was from printables com I reuploaded the correct one.

@MigiPrinter

Print Profile

(Mega Strong) 0.16mm layer, 12 walls, 100% infill

amazing print but the blade side that was touching the supports was deformed, tried to print it on normal and slow, both time failed :/

The designer has replied

@RolandDeschain

That doesn't look like my blade.

@MigiPrinter

but it is lmao

@RolandDeschain

Replying to @MigiPrinter :

My bad, the angle made it look like a completely different blade. Now I can tell it is a zoomed in side profile. You may need to tune your filament as it looks like you might be getting some under extrusion.

(Edited)

@bymafilip

Print Profile

0.16mm layer, 5 walls, 50% infill

it is great but I had to do my custom pins. I would give it 4 stars but it wants successful print record and because my gray filament always failed to go back in ams I cancelled the print in that phase.