Organize your Bambu Lab spare parts on your Ikea Skadis pegboard.

To attach the holders to the Skadis panel I used the excellent Skadis T-Nuts Mounting System. I've provided both the original M2 T-nuts and my own remix that uses heat set inserts.

You will need to print the holders and the T-nuts of your choosing.

Required hardware (per mounting point)

M2 x 10-12mm socket head screw
M2 nut (if using the M2 nut version of the T-nuts)
M2 x 3.0mm L x 3.6mm OD or (4) M2 x 4.0mm L x 3.6mm OD heat set insert (if using the heat set version of the T-nuts)

Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.

If you like this project, please don't forget to ❤ Like and ★ Rate!

* Some of the links above are Amazon Affiliate links