The Cuisinart Premium Single Serve Brewer has a very tall drip tray that can probably hold multiple cups of coffee. I love my coffee and my 16oz Contigo travel mug would not fit without removing the tray.

Unfortunately the fixed drip tray holder has a hole in the bottom so any coffee drips leak out onto the counter. Also without the grate in place coffee cups sit in the coffee drips which means the bottom of my mug always needed to be wiped down.

Long story short I spent way too much time designing this to fit like a stock piece and use the existing grate. It's about as short as possible and just barely fits my mug now.

Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.

If you like this project, please don't forget to ❤ Like and ★ Rate!

Printing tips

I originally printed this at 0.28 layer height as fast as my machine would allow. Supports are required for the slight edge.

I recommend printing in PETG (or any other waterproof material) unless you want it to absorb the coffee drips and swell over time.