Himmel From Frieren - 4 Colours - Free 3D Print Model

Search models, users, collections, and posts

Side Quest Hues

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

H2S

P1P

H2C

P1S

X1E

P2S

X2D

A2L

H2D Pro

H2D

0.08mm layer, 2 walls, 100% infill

Designer

5.7 h

1 plate

Open in Bambu Studio

Boost

Released

Description

I actually made this about 4-5 months ago but never got around to uploading it. Currently uploading a few this week that will be older ones I never got around to posting.

Project: 3.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA BambuLab
Basic Basi Black Transmission Distance: 0.3
    #0a2989 PLA BambuLab
Basic Basic Blue Transmission Distance: 2.2
    #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3
    #eaffff PLA BambuLab Matte Ivory White Transmission Distance: 3.4
This print uses 4 unique filaments

Swap Instructions:
    Start with PLA BambuLab
Basic Basi
    At layer #7 (0.64mm) swap to BambuLab
Basic Basic Blue
    At layer #16 (1.36mm) swap to BambuLab Matte Sky Blue
    At layer #21 (1.76mm) swap to BambuLab Matte Ivory White for the rest.