Acrylic Painting Styled Blastoise

I was kinda craving a original 3 starter set that kinda gave off a thick acrylic painting vibe so I created this set. Although I think Venusaur turned out the best, I think he's not fully in style so I might either fix up Blastoise to look more vibrant like Venusaur or vice versa.

Project: Acrylic Blastoise 7.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mm

    #0056b8 PLA BambuLab Basic Cobalt Blue  Transmission Distance: 0.8
    #000000 PLA #BambuLab Basic Black  Transmission Distance: 0.6
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.8
    #4d3324 PLA BambuLab Matte Dark Chocolate  Transmission Distance: 0.1
    #0a2989 PLA #BambuLab Basic Blue  Transmission Distance: 2.2
    #042f56 PLA BambuLab Matte Dark Blue  Transmission Distance: 0.2
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.6
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Cobalt Blue
    At layer #7 (0.64mm) swap to #BambuLab Basic Black
    At layer #9 (0.8mm) swap to BambuLab Basic Sunflower Yellow
    At layer #11 (0.96mm) swap to BambuLab Matte Dark Chocolate
    At layer #12 (1.04mm) swap to #BambuLab Basic Blue
    At layer #14 (1.2mm) swap to BambuLab Matte Dark Blue
    At layer #16 (1.36mm) swap to BambuLab Basic Cobalt Blue
    At layer #20 (1.68mm) swap to BambuLab Basic Turquoise
    At layer #25 (2.08mm) swap to BambuLab Matte Ivory White for the rest.