Pikachu - (My Sons First Hueforge)

My son wanted to learn how to make HF's so he and I sat down this weekend and we played around to make one to his liking .

Project: Fixed Tristys Pikachu.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #4d3324 PLA BambuLab Matte Dark Chocolate  Transmission Distance: 0.1
    #de4343 PLA #BambuLab Matte Scarlet Red  Transmission Distance: 2
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
    #0a2989 PLA #BambuLab Basic Blue  Transmission Distance: 2.2
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #f7d959 PLA #BambuLab Matte Lemon Yellow  Transmission Distance: 4
This print uses 7 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #11 (0.96mm) swap to BambuLab Matte Dark Chocolate
    At layer #12 (1.04mm) swap to #BambuLab Matte Scarlet Red
    At layer #14 (1.2mm) swap to BambuLab Matte Ivory White
    At layer #15 (1.28mm) swap to #BambuLab Basic Blue
    At layer #18 (1.52mm) swap to BambuLab Basic Pumpkin Orange
    At layer #20 (1.68mm) swap to #BambuLab Matte Lemon Yellow
    At layer #24 (2mm) swap to BambuLab Matte Ivory White for the rest.