Himmel From Frieren old and young version
Print Profile(1)
Description
A second version I made forever ago since I couldn't decide which one to make.
Project: 1.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA BambuLab
Basic Black Transmission Distance: 0.3
#0a2989 PLA BambuLab
Basic Basic Blue Transmission Distance: 2.2
#56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3
#eaffff PLA BambuLab Matte Ivory White Transmission Distance: 3.4
This print uses 4 unique filaments
Swap Instructions:
Start with PLA BambuLab
Basic Black
At layer #7 (0.64mm) swap to BambuLab
Basic Basic Blue
At layer #13 (1.12mm) swap to BambuLab Matte Sky Blue
At layer #21 (1.76mm) swap to BambuLab Matte Ivory White for the rest.
License
Comment & Rating (0)